An administrator is managing multiple Windows and Linux VMs connected to Nutanix Volumes. The Linux VMs are experiencing intermittent connectivity issues. The Windows VMs do not experience the same issue.
Which option should the administrator use to resolve this issue?

• A. Utilize Jumbo Frames
• B. Set the SCSI timeout value to 60
• C. Utilize a separate subnet for the Linux VMs
• D. Add additional disks to the Volume Group

An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?

• A. Add a minimum of four SSDs to each node to ensure all writes go to the SSDs.
• B. Add a minimum of four virtual disks to each VM, and aggregate them on guest OS level.
• C. Add one large virtual disk to each VM. and use it for all application data.
• D. Add one large SSD to each node and enable Flash Mode for the VMs.

For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?

• A. Restart networking services on the CVM
  * Determine the current configuration of the affected CVM via output
  * Access the Alerts/Events page for the CVM network connection failures
• B. Access the Hardware Page to verify resources are available
  * Analyze ail CVM Speed Alerts in the Alerts/Events page
  * Analyze output for the network and interface properties and connectivity issues
• C. Verify Host/CVM connectivity on the Network Visualization page
  * Use to verify the bridge and bond configuration
  * Review alerts/events page for the CVM disconnected error
• D. Review Alerts page for NIC speed alerts and alert timing
  * Analyze the genesis.out log file for process failures
  * Assess the NIC properties in the Network Visualization > Host Properties page

An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)

• A. Relocate the linked LDAP servers
• B. Stop all Nutanix Files clusters
• C. Shut down all user VMs in the cluster
• D. Reconfigure IPMI for the new datacenter

An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present.
A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project.
Which step should the administrator use to initiate the project?

• A. Enable Jumbo Frames to accommodate network frames
• B. Convert storage only nodes into vSphere nodes
• C. Manually disable CVM network Segmentation
• D. Enable Nutanix Flow at the Prism Central Level