Cisco 300-610 Certification Exam Dumps with 262 Practice Test Questions
New 300-610 Exam Dumps with High Passing Rate
Cisco 300-610 exam is an essential certification exam for professionals who want to validate their skills in designing Cisco data center infrastructure. 300-610 exam covers a range of topics related to data center infrastructure design, including networking, storage, compute, automation, and security. Passing 300-610 exam is a crucial step for professionals who want to advance their career in the field of data center infrastructure design and management.
Cisco 300-610 exam is a certification exam designed for professionals who are interested in becoming experts in designing Cisco Data Center Infrastructure. Being certified in 300-610 exam will not only increase your knowledge in Cisco Data Center Infrastructure but also give you a competitive edge in the job market. Therefore, if you are interested in becoming a Cisco Data Center Infrastructure expert, 300-610 exam is an excellent way to start.
NEW QUESTION # 140
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Nexus Fabric Manager
- B. Cisco Virtual Topology System
- C. Cisco Data Center Network Manager
- D. Cisco CloudCenter
Answer: B
NEW QUESTION # 141
A customer needs a design for a new data center network that meets these requirements:
Logically partition the environment into separate security domains.
Cut costs related to purchasing additional equipment.
Separate routing processes, TCAM, QoS tables, and data planes.
Which technology must be used?
- A. vPC
- B. VDC
- C. VLAN
- D. VRF
Answer: D
NEW QUESTION # 142
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. VSS that has unified uplinks
- B. vPC that has unified uplinks
- C. Ethernet and unified ports on the same port channel
- D. cross-connections with pinning
Answer: B
Explanation:
Section: Storage Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION # 143
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Create a SAN port channel that faces the storage device to sustain a link failure.
- B. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- C. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- D. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
Answer: B
NEW QUESTION # 144
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the connect local-management command on each fabric interconnect.
- B. Run the disable fips-mode command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Erase the configuration of both fabric interconnects.
Answer: C
NEW QUESTION # 145
An engineer must design a solution to divide the workload across two different data centers and achieve redundancy in case of the failure of either data center Which solution must the engineer choose?
- A. single Cisco HyperFlex stretched cluster
- B. Cisco Hyperflex ROBO cluster
- C. Cisco Hyperflex edge cluster
- D. single Cisco HyperFlex standard cluster
Answer: A
NEW QUESTION # 146
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the connect local-management command on each fabric interconnect.
- B. Run the disable fips-mode command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Erase the configuration of both fabric interconnects.
Answer: C
Explanation:
Section: Compute Design
Explanation/Reference:
NEW QUESTION # 147
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have access to its own VRF instance.
Which interface should be used to meet these requirements?
- A. management interface
- B. interface VLAN
- C. physical interface
- D. loopback interface
Answer: A
NEW QUESTION # 148
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed rising tools that support XML or JSON encoding.
Which two components should be included in the design? (Choose two.)
- A. Bash shell
- B. HTTPS
- C. HTTP
- D. SSH
- E. NX-API
Answer: B,E
Explanation:
NX-API supports HTTPS. All communication to the device is encrypted when you use HTTPS.
NX-API is integrated into the authentication system on the device. Users must have appropriate accounts to access the device through NX-API. NX-API uses HTTP basic authentication. All requests must contain the username and password in the HTTP header.
You should consider using HTTPS to secure your user's login credentials.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6- x/programmability/guide/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Guide/b_Cisco_Nexus_9000_Series_NX- OS_Programmability_Configuration_Guide_chapter_0101.html
NEW QUESTION # 149
What is a design consideration when implementing FSPF?
- A. Routes are based on the distance vector protocol.
- B. FSPF runs only on F Ports.
- C. Routes are based on the domain ID.
- D. FSPF runs on a per-chassis basis.
Answer: C
NEW QUESTION # 150
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure the port monitor to allow categorization of a specific device as slow.
- B. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- C. Use the port-monitor command to detect slow drain devices.
- D. Configure the port channel to enable individual buffer-to-buffer credits.
- E. Configure the flow control for the FC to use R_RDY.
Answer: A,B
Explanation:
- Extended Receiver Ready - This feature allows each ISL between supporting switches to be split into four separate virtual links, with each virtual link assigned its own buffer-to-buffer credits.
Virtual link 0 used to carry control traffic, virtual link 1 is used to carry high-priority traffic, virtual link 2 is used to carry slow devices, and virtual link 3 is used to carry normal traffic.
- Congestion Isolation - This feature allows devices to be categorized as slow by either configuration command or by port monitor.
- Port monitor portguard action for Congestion Isolation - Port monitor has a new portguard option to allow the categorization of a device as slow so that it can have all traffic flowing to the device routed to the slow virtual link.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/interfaces/cis co_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION # 151
An engineer must connect an existing Cisco UCS Fabric Interconnect to an IP-based storage array. The connection must be a port channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic.
Which port type should be used to meet these requirements?
- A. appliance
- B. network
- C. server
- D. uplink
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade- server-chassis/116075-ucs-app-connectivity-tshoot-00.html
NEW QUESTION # 152
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 153
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. target server
- B. ARP entries
- C. number of vHBAs
- D. VXLAN membership
- E. UUID assignment
Answer: C,E
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter_0100000.html
NEW QUESTION # 154
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. HX240c
- B. Gigabit Ethernet Switch
- C. Fabric Interconnect 6300
- D. UCS B200
- E. HX220c
Answer: A,D
NEW QUESTION # 155
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Nexus Fabric Manager
- B. Cisco Data Center Network Manager
- C. Cisco CloudCenter
- D. Cisco Virtual Topology System
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/DCNM_OLH/SAN_Client/fmhelp/f mc.html#34479
NEW QUESTION # 156
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 157
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?
- A. Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
- B. Cisco UCS Manager provides service profile portability across nodes.
- C. Cisco Intersight automatically creates an invisible cloud witness.
- D. Cisco HyperFlex Edge provides native container support through the KVM hypervisor.
Answer: C
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/hyperconverged-infrastructure/hyperflex-hx- series/whitepaper-c11-741999.pdf
NEW QUESTION # 158
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?
- A. vPC
- B. VDC
- C. VRF
- D. vFC
Answer: C
NEW QUESTION # 159
......
Cisco 300-610 certification exam is a challenging and rewarding certification that is highly respected in the IT industry. Passing 300-610 exam demonstrates a high level of expertise in designing, deploying, and maintaining data center infrastructure using Cisco technologies. Designing Cisco Data Center Infrastructure certification is recommended for IT professionals who are looking to advance their careers in data center infrastructure design and management.
Get 300-610 Braindumps & 300-610 Real Exam Questions: https://www.freepdfdump.top/300-610-valid-torrent.html
Cisco 300-610 Actual Questions and Braindumps: https://drive.google.com/open?id=1Sj51hqz04eaZPLbJJnYJd7uU-B_MuD7u
