FCP_ZCS-AD-7.4 PDF Exam Material 2025 Realistic FCP_ZCS-AD-7.4 Dumps Questions
Updated Fortinet FCP_ZCS-AD-7.4 Dumps – PDF & Online Engine
NEW QUESTION # 12
Refer to the exhibits.
You are configuring an SDN connector for Azure on a FortiGate device You completed all the required steps on the Azure side. While configuring the FortiGate side, you notice that you did not save the client secret used in the Azure App Registration.
What is the quickest way to obtain the value of the client secret?
- A. Create a new appregistration
- B. Create a new client secret
- C. Create a new resource group
- D. Create a new external connector for Azure
Answer: B
Explanation:
Azuredoes not allow you to view an existing client secret's value after creationfor security reasons. If you did not save the client secret when it was first generated, thequickest and only optionis tocreate a new client secretunder the existing app registration and use the new value in your FortiGate configuration.
NEW QUESTION # 13
Which output was taken on a VM running in Azure?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Azure assigns MAC addresses in a specific Organizationally Unique Identifier (OUI) range. The MAC addressd8-34-99-c5-0A-BCbegins withd8-34-99, which is a Microsoft-assigned OUI used in Azure virtual networks. This strongly indicates the output was taken from a VM running in Azure.
NEW QUESTION # 14
What is a limitation of the Network Security Groups (NSGs) in Azure?
- A. NSGs are applied only to vNICs.
- B. NSGs allow the filtering of inbound traffic only.
- C. NSGs cannot be applied to individual virtual machines.
- D. NSGs operate at the application layer, limiting their effectiveness in the network layer.
Answer: A
Explanation:
Alimitation of NSGsis that they are applied only at thesubnet level or to network interfaces (vNICs), not directly to other resources like load balancers or application gateways. This meansgranular application- layer filteringis not supported, andNSGs primarily operate at Layers 3 and 4.
NEW QUESTION # 15
Why would you use a user-defined route in Azure?
- A. To have the traffic from the other VMs inspected by FortiGate
- B. To allow communication between FortiGate VMs on two subnets in the same VNET
- C. To allow inbound management access to FortiGate VMs
- D. To manage user authentication and access control
Answer: A
Explanation:
Auser-defined route (UDR)in Azure is used toredirect trafficfrom other VMsthrough a FortiGate VM for inspection. By modifying the routing table, you ensure that outbound or inter-subnet traffic issent to the FortiGate as the next hop, enablingtraffic filtering, logging, and security enforcement.
NEW QUESTION # 16
Refer to the exhibit.
Your company runs front-end web servers in Azure. You need to deploy a Linux VM to be used as a web server.
To protect your web servers with a web application firewall (WAF), you deploy FortiWeb to secure applications from web-based attacks.
Which FortiWeb operation mode can you implement for this scenario?
- A. Reverse proxy
- B. Passive monitoring
- C. True transparent proxy
- D. Transparent inspection
Answer: A
Explanation:
TheReverse Proxymode is the most appropriate FortiWeb operation mode for this scenario. In this mode, FortiWeb sits between internet users and the Linux web servers, terminating client connections and then forwarding requests to the backend servers. This enablesdeep inspection, protection from web attacks (like SQL injection and XSS), andfull WAF functionality, making it ideal for securing front-end web servers exposed to the internet.
NEW QUESTION # 17
After integrating a FortiGate VM with Azure Route Server, you detect that routes are not propagating successfully.
What initial step could you perform to diagnose the root cause?
- A. Monitor the network latency between the FortiGate VM and Azure Route Server to identify potential communication delays affecting route propagation
- B. Verify the BGP peering status on both the FortiGate VM and Azure Route Server
- C. Verify that the FortiGate VM is running the latest firmware version
- D. Examine the Azure Microsoft Entra ID permissions associated with the FortiGate VM to ensure that correct authentication is being used for BGP peering
Answer: B
Explanation:
Thefirst and most direct diagnostic stepis toverify the BGP peering statuson both theFortiGate VM and Azure Route Server. If BGP peering is not established or is in an idle or down state, route propagation will fail. This check confirms whether the two systems are communicating and exchanging routes as expected.
NEW QUESTION # 18
Refer to the exhibit.
In an expanding corporation, the different branches share resources connecting to Azure through Azure VPN Gateway and ExpressRoute Gateway.
Which Azure solution can you implement to simplify and centralize the seamless sharing of the dynamic routing between FortiGate VMs and branches?
- A. Azure Route Server
- B. Azure Virtual Hub
- C. Azure Virtual WAN
- D. Azure Traffic Manager
Answer: A
Explanation:
Azure Route Serversimplifies dynamic routing by allowing yourFortiGate VMsto exchange BGP routes directly with Azure's networking fabric. This eliminates the need to manually update route tables and enables seamless, centralized communication between on-premises branches and Azure resources through bothVPN GatewayandExpressRoute Gateway.
NEW QUESTION # 19
Refer to the exhibit.
Your organization is planning the implementation of a complex hub-to-spoke solution to meet automated large-scale branch connectivity with multiple regions, offering a diverse range of connectivity options.
Which Azure networking service can deliver a solution?
- A. Azure Firewall Manager
- B. Azure VPN Gateway
- C. Azure Virtual WAN
- D. Azure SD-WAN
Answer: C
Explanation:
Azure Virtual WANis designed forlarge-scale, automated, and global branch connectivity, supporting hub-and-spoke architecturesacross multiple regions. It enablescentralized routing,hub-to-hub connectivity, and integrates withVPN, ExpressRoute, and SD-WAN solutions, making it ideal for complex, multi-region deployments as shown in the diagram.
NEW QUESTION # 20
Refer to the exhibit.
A high availability, active-active FortiGate with Elastic Load Balancing (ELB) and Internal Load Balancing (ILB) was deployed in your Azure environment.
Which tools can you use to configure synchronization? (Choose two.)
- A. Software-defined network (SDN) Fabric Connector
- B. Autoscale
- C. Heartbeat interfaces
- D. FortiGate Clustering Protocol (FGCP)
- E. FortiManager
Answer: C,D
Explanation:
In aFortiGate active-active HA deployment in Azure, synchronization between instances is achieved using:
FortiGate Clustering Protocol (FGCP)- This is the primary protocol used to synchronize configuration and session information between HA peers.
Heartbeat interfaces- These interfaces are specifically configured to exchange HA state and sync data between the FortiGate VMs, ensuring cluster consistency.
NEW QUESTION # 21
Which statement about deploying VMs in a gateway subnet is true?
- A. VMs are required in a gateway subnet
- B. VMs can be deployed in a gateway subnet only after you deploy the VPN Gateway
- C. VMs are not allowed in a gateway subnet
- D. VMs are automatically deployed in a gateway subnet
Answer: C
Explanation:
Azure does not allow the deployment of virtual machines (VMs) in a gateway subnet.The gateway subnet is specifically reserved forAzure VPN Gateway or ExpressRoute Gateway instances, and deploying other resources in it can causegateway deployment or operation failures.
NEW QUESTION # 22
What are two characteristics of Azure standard public IP addresses? (Choose two.)
- A. They can be used with load balancers of any SKU
- B. They can be dynamic or static
- C. They require the configuration of NSGs for inbound traffic
- D. They support the use of availability zones
Answer: B,D
Explanation:
They support the use of availability zones - Standard public IP addresses are zone-redundant and support availability zone deployments for high availability.
They can be dynamic or static - Azure standard public IPs can be configured as static or dynamic, offering flexibility based on deployment needs.
NEW QUESTION # 23
What is a key advantage of the branch-to-hub to hub-to-branch topology in an Azure virtual WAN?
- A. Enhanced scalability enables communication between branch offices
- B. Improved branch-to-branch communication for faster data transfer
- C. Increased security through isolated connections between branches and hubs
- D. Load balancing enabled by the simultaneous connection of each branch to multiple hubs
Answer: B
Explanation:
Thebranch-to-hub to hub-to-branchtopology in Azure Virtual WAN enablesefficient branch-to-branch communicationby routing traffic through connected hubs. This improvesdata transfer speed and reliability between branches without needing direct connections between all sites, simplifying management while maintaining performance.
NEW QUESTION # 24
Your organization is planning to deploy FortiWeb in Azure to provide a web application security solution to its web servers. One of the requirements is to have granular control of the number of vCPUs and memory assigned to this resource.
Which cloud model could meet this requirement?
- A. Function-as-a-Service (FaaS)
- B. Software-as-a-Service (SaaS)
- C. Platform-as-a-Service (PaaS)
- D. Infrastructure-as-a-Service (IaaS)
Answer: D
Explanation:
Infrastructure-as-a-Service (IaaS)allows you to deploy FortiWeb as a virtual machine in Azure, giving you granular control over vCPU and memory allocation. This model provides full flexibility over the compute resources and network configuration, which is essential for deploying and scaling security appliances like FortiWeb.
NEW QUESTION # 25
Refer to the exhibit.
An Azure Route Server and an active-passive FortiGate with Elastic Load Balancing (ELB) and Internal Load Balancing (ILB) have been deployed successfully and they are sharing and populating BGP routes in the Protected VNet.
A Linux server has been deployed in a new VNet spoke. It is expected that Azure Route Server should inject the FortiGate BGP routes into the Linux server but that failed.
How can you diagnose the problem?
- A. Linux server doesn't support BGP negotiation with Azure Route Server
- B. Monitor effective routes on the Azure network interface (NIC) of the Linux server
- C. Verify the BGP setup on Azure Route Server
- D. Review FortiGate BGP neighbors
Answer: B
Explanation:
TheLinux server in the spoke VNet cannot directly peer BGP with the Azure Route Server, as it is not a BGP-enabled device. Instead,Azure propagates routes to VMs through the effective route tables associated with theirnetwork interfaces (NICs). Therefore, to diagnose why BGP routes are notreaching the Linux VM, you shouldmonitor the effective routes on the NICto verify if the routes from the FortiGate (via the Route Server) are being injected properly.
NEW QUESTION # 26
How does Azure ExpressRoute contribute to achieving predictable latency for network traffic?
- A. By relying on load balancing to dynamically optimize latency
- B. By establishing dedicated private connections to Azure data centers
- C. By using public internet connections for enhanced routing flexibility
- D. By prioritizing Azure ExpressRoute traffic over other network traffic
Answer: B
Explanation:
Azure ExpressRouteprovidesdedicated private connectionsbetween on-premises infrastructure and Azure data centers, bypassing the public internet. This results inmore predictable latency, higher reliability, and better security, making it ideal for mission-critical workloads.
NEW QUESTION # 27
......
Fortinet FCP_ZCS-AD-7.4 Dumps PDF Are going to be The Best Score: https://www.freepdfdump.top/FCP_ZCS-AD-7.4-valid-torrent.html
FCP_ZCS-AD-7.4.pdf - Questions Answers PDF Sample Questions Reliable: https://drive.google.com/open?id=1PyoUD9s9AsnjP_MgPODltWx_iVRMk5Nu
