Free 2021 NCIE-SAN Specialist NS0-520 dumps are available on Google Drive shared by FreePdfDump
Welcome to download the newest FreePdfDump NS0-520 PDF dumps: https://www.freepdfdump.top/NS0-520-valid-torrent.html ( 60 Q&As)
NEW QUESTION 11
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server.
After the administrator performs a rescan, the LUN is not visible on the host.
Which statement describes how to solve this problem?
- A. Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.
- B. Create an igroup, add the iSCSI IQN, then map the LUN to the igroup.
- C. Perform a takeover/giveback of the controller that is hosting the LUN.
- D. Enable ALUA support on the VMware host.
Answer: B
NEW QUESTION 12
An administrator suspects abnormal operation and performance-related issues within a particular SAN environment. The administrator wants to further investigate the environment in terms of overall health, best practice recommendations, proactive remediation, and risk assessments, as compared to other SAN deployments.
Which tool should the administrator use to assess this information?
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. Interoperability Matrix Tool (IMT)
- D. Active IQ
Answer: B
NEW QUESTION 13
You need to guarantee that SAN protocols are used in a new storage virtual machine (SVM).
In this scenario, which LIF service policy is required?
- A. default-data-blocks
- B. default-cluster
- C. default-data-files
- D. default-management
Answer: A
NEW QUESTION 14
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. Active IQ OneCollect
- B. Interoperability Matrix Tool (IMT)
- C. Hardware Universe (HWU)
- D. OnCommand Insight (OCI)
Answer: C
NEW QUESTION 15
You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.
Which tool enables you to confirm that this will be a valid addition?
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. Hardware Universe (HWU)
- D. Active IQ
Answer: C
NEW QUESTION 16
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw6
- B. sw5
- C. sw4
- D. sw10
Answer: A
NEW QUESTION 17
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the storage back-end subsystem.
In this scenario, which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Pull an Ethernet cable from a Linux host.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Perform a storage controller failover.
Answer: C,D
NEW QUESTION 18
You have a Windows 2016 server that you want to boot from an iSCSI LUN presented from an AFF A700.
To configure boot from SAN, where would you find the information to populate the NetApp igroup?
- A. network switch
- B. server BIOS
- C. Windows iSCSI initiator
- D. iSCSI HBA BIOS
Answer: D
NEW QUESTION 19
You have a 2-node AFF A220 switchless cluster serving iSCSI LUNs. NetApp Volume Encryption (NVE) is enabled on all data volumes. You are asked to consolidate identical boot LUNs that are on both controllers. You need to nondisruptively consolidate LUNs with the highest storage efficiency.
In this scenario, which NetApp ONTAP technology accomplishes this task?
- A. LIF migrate
- B. aggregate relocate
- C. LUN move
- D. volume move
Answer: D
NEW QUESTION 20
You are in the testing phase of a newly deployed NVMe over Fibre Channel (NVMe/FC) SAM environment using Asynchronous Namespace Access (ANA). You are unable to successfully fail over a workload.
In this scenario, which action should you perform?
- A. Verify that the host operating system version supports ANA.
- B. Verify that the NVMe/FC host utilities kit is installed for ANA.
- C. Verify that multi-initiator zoning is configured on the FC switches.
- D. Verify that the DM-Multipath driver is configured for ANA.
Answer: D
NEW QUESTION 21
An administrator is designing a SAN solution.
What are two considerations when completing this task? (Choose two.)
- A. limiting the number of paths to eight paths per node
- B. identifying the maximum number of paths that are supported by a host operating system
- C. limiting the number of paths to eight paths per LUN
- D. identifying the maximum number of paths that are supported by a multipath driver
Answer: B,D
NEW QUESTION 22
You are called to help with a new customer's SAN environment that consists of an 8-node AFF A700 cluster, Cisco MDS fabric switches, and Cisco UCS servers.
Which two tools would help you to assess the environment? (Choose two.)
- A. Active IQ OneCollect
- B. Brocade SAN Health
- C. Active IQ Upgrade Advisor
- D. NetApp ONTAP Mediator
Answer: A,C
NEW QUESTION 23
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. AutoSupport OnDemand
- B. OneCollect
- C. Perfstat
- D. Upgrade Advisor
Answer: D
NEW QUESTION 24
An administrator has taken over managing an AFF A320 4-node SAN environment with several attached hosts. The administrator is asked to inventory the environment before performing firmware updates.
In this scenario, which two tools would satisfy the requirement? (Choose two.)
- A. Brocade SAN Health Check
- B. Active IQ OneCollect
- C. Active IQ
- D. Upgrade Advisor
Answer: B,D
NEW QUESTION 25
Click the Exhibit button.
Referring to the exhibit, which two Fibre Channel names should you zone on the FC switch to provide connectivity to the LUN? (Choose two.)
- A. 50:0a:09:82:9c:16:cc:00
- B. 20:00:00:50:56:9c:16:cc
- C. 50:0a:09:82:9c:7a:4e:00
- D. 20:01:00:50:56:9c:16:cc
Answer: B,D
NEW QUESTION 26
......
Tested Material Used To NS0-520: https://www.freepdfdump.top/NS0-520-valid-torrent.html
