Free 300-730 Exam Braindumps certification guide Q&A
300-730 Certification Overview Latest 300-730 PDF Dumps
NEW QUESTION # 84
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. AnyConnect profile
- B. EAP-AnyConnect
- C. EAP query-identity
- D. use of certificates instead of username and password
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION # 85
A router is being configured for IKEv2 AnyConnect using AnyConnect-EAP. How would the administrator separate profiles for administrators and employees so that authorization differs when they connect?
- A. Define key-ids on the headend and create two XML profiles to match the administrator and user key-ids.
- B. Define group-urls on the headend and create two XML profiles to match the administrator and user group urls
- C. Create a certificate map and match on the appropriate certificate fields
- D. Define group aliases on the headend and have the user pick the appropriate alias when they connect
Answer: D
Explanation:
When configuring IKEv2 AnyConnect using AnyConnect-EAP, the administrator can define group aliases on the headend and have the user pick the appropriate alias when they connect. This allows the administrator to separate profiles for administrators and employees so that authorization differs when they connect.
NEW QUESTION # 86
An engineer is requesting an SSL certificate for a VPN load-balancing cluster in which two Cisco ASAs provide clientless SSLVPN access. The FQDN that users will enter to access the clientless VPN is asa.example.com, and users will be redirected to either asa1.example.com or asa2.example.com. The cluster FQDN and individual Cisco ASAs FQDNs resolve to IP addresses 192.168.0.1, 192.168.0.2, and 192.168.0.3 respectively. The issued certificate must be able to be used to validate the identity of either ASA in the cluster without returning any certificate validation errors. Which fields must be included in the certificate to meet these requirements?
- A. CN=192.168.0.1, SAN=192.168.0.1, 192.168.0.2, 192.168.0.3
- B. CN=asa.example.com, SAN=asa.example.com, asa1.example.com, asa2.example.com
- C. CN=192.168.0.1, SAN=asa1.example.com, asa2.example.com
- D. CN=*.example.com, SAN=asa.example.com
Answer: B
Explanation:
https://integratingit.wordpress.com/2020/03/14/asa-vpn-load-balancing/
NEW QUESTION # 87
Refer to the exhibit. The DMVPN spoke is not establishing a session with the hub. Which two actions resolve this issue? (Choose two.)
- A. Change the ISAKMP key address on the spoke to 0.0.0.0.
- B. Change the nhrp authentication key on the spoke to cisco123.
- C. Change the transform set to mode tunnel.
- D. Change the spoke nhs to 172.16.18.1 and the nbma to 10.0.0.1.
- E. Change the ISAKMP policy authentication on the spoke to pre-shared.
Answer: B,E
NEW QUESTION # 88
Refer to the exhibit.
A user is connecting from behind a PC with a private IP Address. Their ISP provider is blocking TCP port 443. Which AnyConnect XML configuration will allow the user to establish a connection with the ASA?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION # 89
Which two types of web resources or protocols are enabled by default on the Cisco ASA Clientless SSL VPN portal? (Choose two.)
- A. VNC
- B. HTTP
- C. ICA (Citrix)
- D. CIFS
- E. RDP
Answer: B,D
Explanation:
You will not see an option of RDP, VNC, SSH, and/or Telnet unless the appropriate client/server plug-in has been installed first.
https://www.cisco.com/c/en/us/td/docs/security/asa/asa94/config-guides/cli/vpn/asa-94-vpn- config/webvpn-configure-gateway.html
NEW QUESTION # 90
Refer to the exhibit. The VPN tunnel between the FlexVPN spoke and FlexVPN hub 192.168.0.12 is failing.
What should be done to correct this issue?
- A. Add the match fvrf any command to the IKEv2 policy.
- B. Add the aaa authorization group psk list Flex_AAA Flex_Auth command to the IKEv2 profile configuration.
- C. Add the address 192.168.0.12 255.255.255.255 command to the keyring configuration.
- D. Add the tunnel mode gre ip command to the tunnel configuration.
Answer: B
NEW QUESTION # 91
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. crypto access list
- B. transform set
- C. preshared key
- D. Phase 1 policy
Answer: C
Explanation:
IKE Message from X.X.X.X Failed its Sanity Check or is Malformed
This debug error appears if the pre-shared keys on the peers do not match. In order to fix this issue, check the pre-shared keys on both sides.
1d00H:%CRPTO-4-IKMP_BAD_MESSAGE: IKE message from 198.51.100.1 failed its sanity check or is malformed
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409-ipsec-debug-00.html#anc17
NEW QUESTION # 92
A user is trying to log in to a Cisco ASA using the clientless SSLVPN feature and receives the error message "clientless (browser) SSLVPN access is not allowed". Which step should the Cisco ASA administrator take to resolve this issue?
- A. Enable the clientless VPN protocol on the group policy.
- B. Verify that a user account exists in the local AAA database for the user.
- C. Validate that the correct license is in use on the ASA for WebVPN.
- D. Increase the number of simultaneous logins allowed on the group policy.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/webvpn-ssl-vpn/119417-config-asa-00.html#anc12 https://community.cisco.com/t5/vpn/clientless-vpn-clientless-browser-ssl-vpn-access-is-not-allowed/td-p/1569690
NEW QUESTION # 93
Refer to the exhibit.
A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?
- A. Remove the maximum SA limit on the remote Cisco ASA.
- B. Correct the crypto access list on both Cisco ASA devices.
- C. Increase the maximum in-negotiation SA limit on the local Cisco ASA.
- D. Reduce the maximum SA limit on the local Cisco ASA.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ikevpn/configuration/xe-3s/sec-ike-for-ipsec-vpns-xe-3s-book/sec-call-addmsn-ike.html
NEW QUESTION # 94
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. crypto access list
- B. transform set
- C. preshared key
- D. Phase 1 policy
Answer: C
NEW QUESTION # 95
An engineer is implementing the FlexVPN solution on a Cisco IOS router. The router must only terminate VPN requests and must not initiate them. Additionally, the interface must support VPNs from other routers and Cisco AnyConnect connections. Which interface type must be configured to meet these requirements?
- A. static virtual tunnel interface
- B. multipoint GRE tunnel interface
- C. point-to-point GRE tunnel interface
- D. virtual template interface
Answer: D
Explanation:
The correct interface type to meet these requirements is the virtual template interface. This interface allows for the creation of multiple virtual access interfaces, which can be used for various types of remote access VPN connections, including site-to-site and AnyConnect VPNs. The virtual template interface can be configured to terminate VPN requests from other routers and allow for dynamic creation of VPN sessions, while also supporting AnyConnect VPN connections.
NEW QUESTION # 96
Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)
- A. AnyConnect Backup Servers
- B. ASA failover
- C. AnyConnect Auto Reconnect
- D. AnyConnect Network Access Manager
- E. AnyConnect Always On
Answer: A,B
Explanation:
According to the Implementing Secure Solutions with Virtual Private Networks (SVPN) documents and learning resources available at cisco.com, the two features that provide headend resiliency for Cisco AnyConnect clients are:
AnyConnect Backup Servers: This feature allows the AnyConnect client to automatically connect to a backup server in case the primary server is unreachable or fails. The backup server list is configured on the ASA or IOS headend and pushed to the client during the VPN connection establishment. The client can also manually select a backup server from the list if needed. This feature enhances the availability and reliability of the VPN service for the clients12.
ASA failover: This feature enables two identical ASAs to be paired together as an active/standby or active/active pair. The ASAs synchronize their configuration and state information and monitor each other's health. If the active ASA fails or becomes unreachable, the standby ASA takes over the traffic and VPN sessions without any disruption for the clients. This feature provides high availability and redundancy for the VPN headend34.
1: AnyConnect Backup Servers 2: Redundancy options for IOS Headend for AnyConnect Clients 3: ASA Failover 4: AnyConnect Implementation and Performance/Scaling Reference for COVID-19 Preparation
NEW QUESTION # 97
Which two types of SSO functionality are available on the Cisco ASA without any external SSO servers? (Choose two.)
- A. SAML
- B. HTTP Basic
- C. OAuth 2.0
- D. NTLM
- E. Kerberos
Answer: B,D
Explanation:
The auto-signon command is a single sign-on method for users of clientless SSL VPN sessions. It passes the login credentials (username and password) to internal servers for authentication using NTLM authentication, basic authentication, or both. Multiple auto-signon commands can be entered and are processed according to the input order (early commands take precedence).
https://www.cisco.com/c/en/us/td/docs/security/asa/asa916/configuration/vpn/asa-916-vpn-config/webvpn-configure-policy-groups.html#ID-2439-00001438
NEW QUESTION # 98
Which benefit of FlexVPN is a limitation of DMVPN using IKEv1?
- A. IKE implementation can install routes in routing table.
- B. GRE encapsulation allows for forwarding of non-IP traffic.
- C. NHRP authentication provides enhanced security.
- D. Dynamic routing protocols can be configured.
Answer: A
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 99
Refer to the exhibit. An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?
- A. Ensure crypto IPsec policy matches on both VPN devices.
- B. Install the correct certificate to validate the peer.
- C. Specify the peer IP address in the tunnel group name.
- D. Correct crypto access list on both VPN devices.
Answer: D
NEW QUESTION # 100
An administrator is setting up Cisco AnyConnect on a Cisco ASA with the requirement that AnyConnect automatically establishes a VPN when a company-owned laptop is connected to the internet outside of the corporate network. Which configuration meets these requirements?
- A. TND with machine certificate authentication
- B. SBL with machine certificate authentication
- C. SBL with user certificate authentication
- D. TND with user certificate authentication
Answer: A
Explanation:
Trusted Network Detection (TND) gives you the ability to have AnyConnect automatically disconnect a VPN connection when the user is inside the corporate network (the trusted network) and start the VPN connection when the user is outside the corporate network (the untrusted network). https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#id_100236
NEW QUESTION # 101
Which two types of SSO functionality are available on the Cisco ASA without any external SSO servers? (Choose two.)
- A. SAML
- B. HTTP Basic
- C. OAuth 2.0
- D. NTLM
- E. Kerberos
Answer: B,D
NEW QUESTION # 102
Refer to the exhibit. Which action must be taken on the IPsec tunnel configuration to resolve the issue?
- A. The access lists on each peer must be identical.
- B. The transform set on each peer must match.
- C. The access lists on each peer must mirror each other.
- D. The transform set on each peer must be compatible.
Answer: C
NEW QUESTION # 103
Regarding licensing, which option will allow IKEv2 connections on the adaptive security appliance?
- A. The Advanced Endpoint Assessment license must be installed to allow Cisco AnyConnect IKEv2 sessions.
- B. Cisco AnyConnect Mobile must be installed to allow AnyConnect IKEv2 sessions.
- C. IKEv2 sessions are not licensed.
- D. AnyConnect Essentials can be used for Cisco AnyConnect IKEv2 connections.
Answer: D
NEW QUESTION # 104
Refer to the exhibit.
Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?
- A. Lower the tunnel MTU.
- B. Enable perfect forward secrecy.
- C. Specify the application networks in the remote identity.
- D. Make an adjustment to IPSec replay window.
Answer: A
NEW QUESTION # 105
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?
- A. AnyConnect images must be uploaded to both failover ASA devices.
- B. Configure a backup server in the XML profile.
- C. The vpnsession-db must be cleared manually.
- D. AnyConnect client must point to the standby IP address.
Answer: A
NEW QUESTION # 106
When a FlexVPN is configured, which two components must be configured for IKEv2? (Choose two.)
- A. proposal
- B. method
- C. persistence
- D. profile
- E. preference
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/support/security/flexvpn/products-configuration-examples-list.html
NEW QUESTION # 107
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. The Phase 1 policy does not match on both devices.
- B. The ISAKMP policy priority values are invalid.
- C. ESP traffic is being dropped.
- D. Tunnel protection is not applied to the DMVPN tunnel.
Answer: C
NEW QUESTION # 108
......
More Details for Exam 300-730
By acing 300-730 exam the candidates not just get closer to the CCNP accreditation. While this one also requires them to pass the core test 350-701 by code, there is also another certificate to obtain. Initially, 300-730 leads to acquiring Cisco Certified Specialist – Network Security VPN Implementation.
The exam itself lasts for 1.5 hours and concerns questions in the form of teslets, MCs, fill-in-the-blank, and others. You will be tested either in English or Japanese based on the language you prefer.
The Best Cisco 300-730 Study Guides and Dumps of 2024: https://www.freepdfdump.top/300-730-valid-torrent.html
Top Cisco 300-730 Exam Audio Study Guide! Practice Questions Edition: https://drive.google.com/open?id=1tGsD98rWPkE-2lbchSxqWh1OrXRuSRyB
