H31-341-ENU PDF Dumps Jul 06, 2022 Recently Updated Questions [Q18-Q38]

Share

H31-341-ENU PDF Dumps | Jul 06, 2022 Recently Updated Questions

H31-341-ENU Exam Questions – Valid H31-341-ENU Dumps Pdf


Certification Topics of Huawei H31-341 Exam

The following are the topics that may come up in the Huawei H31-341 exam:

  • Aware of professional knowledge - 10%
  • Multiple choice questions - 40%
  • Basic knowledge - 50%

 

NEW QUESTION 18
If the LED indicator value on the SCC board of the OSN 8800 T32 board is 11, which of the following is the subrack ID?

  • A. Slave subrack 17
  • B. Slave subrack 2
  • C. Slave subrack 1
  • D. Slave subrack 11

Answer: D

 

NEW QUESTION 19
For a 10G OTU board, the receiving end optical module uses PIN module. Which of the following receiving powers is in the normal receiving range of the board?

  • A. -19dBm
  • B. -9dBm
  • C. 19dBm
  • D. 9dBm

Answer: B

 

NEW QUESTION 20
The collection and storage of on-site data includes periodic collection during normal operation of the equipment and collection of equipment failures. Generally, before the fault is processed, the maintenance personnel must collect and save the field data.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 21
In WDM transmission systems, the main factors affecting the unevenness of power balance of each channel which are not included? (Multiple choice)

  • A. Cable aging is high
  • B. Non-uniformity of insertion loss of each channel of the multiplexer/demultiplexer
  • C. EDFA gain unevenness
  • D. The main channel dimming fader setting is unreasonable

Answer: A,B,C,D

 

NEW QUESTION 22
What are the classification of Ethernet performance tests? (Multiple choice)

  • A. Custom test
  • B. Network equipment performance verification test
  • C. Network performance test

Answer: A,B,C

 

NEW QUESTION 23
The optical monitoring channel wavelength used by the ST2 board is: (Multiple choice)

  • A. 1510nm
  • B. 1511nm
  • C. 1491nm
  • D. 1471nm

Answer: B,C

 

NEW QUESTION 24
Dispersion compensation is not required for 40 Gbit/s and 100 Gbit/s coherent systems because the dispersion tolerance of coherent boards is large. NG WDM products do not support hybrid transmission of non-coherent and coherent networks.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 25
The maximum output optical power of an OBU board is 20 dBm, when it is used in a C-band 80-channel system, what is the standard per-channel output optical power?

  • A. +4dBm
  • B. +7dBm
  • C. -2dBm
  • D. +ldBm

Answer: D

 

NEW QUESTION 26
In WDM systems, when using less than () wavelength, it is ideal to use dielectric thin film filter (TFF).

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 27
Which of the following IP addresses are not part of the private IP address?

  • A. 10.255. 0.1
  • B. 10.0.0.1
  • C. 172.128.0.1
  • D. 192.168.0.1

Answer: C

 

NEW QUESTION 28
What are the ways that NG WDM devices create fibers? (Multiple Choice)

  • A. Graphic method
  • B. Synchronization method
  • C. Search method
  • D. Form method

Answer: A,C,D

 

NEW QUESTION 29
Which of the following tools may Board replacement use? (Multiple choice)

  • A. U2000
  • B. Fiber extractor
  • C. Shielding bag
  • D. Anti-static gloves

Answer: A,B,C,D

 

NEW QUESTION 30
For emergency handling of business interruptions, fault location should be performed as soon as possible, and then the business should be resumed.

  • A. TRUE
  • B. FALSE

Answer: A

 

NEW QUESTION 31
In the Colored&Directioned scenario of the 4D ROADM, if you want to implement local service scheduling in four directions, how many sets of M40V+D40 are needed?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A

 

NEW QUESTION 32
Which of the following description of the process for optimizing the line attenuation compensation anomaly is correct? (Multiple choice)

  • A. The SCC board at the downstream site of the fault reports the alarm to the power detection unit (OA) of the first node through DCN communication, and reports the alarm to the SOM on the SC of the first node.
  • B. The downstream power detection unit (OA) detects that the line attenuation deviation exceeds the threshold and reports the alarm to its own SCC board.
  • C. After receiving the alarm, the SOM obtains the OCh path corresponding to the alarm and adds it to the management path to be optimized.
  • D. According to the user adjustment command, adjust the line attenuation of the OCh path to make the downstream light output reach the normal value.

Answer: B,C,D

 

NEW QUESTION 33
Which of the following application scenarios that belong to the change configuration method? (Multiple choice)

  • A. If you suspect that there is a problem with a slot, you can exclude it by changing the board configuration.
  • B. If you suspect that there are problems with certain channels or one of the tributary boards of the tributary board, you can change the time barrier configuration to configure the service to another channel or to another tributary board.
  • C. In the upgrade and expansion, if you suspect that the new configuration is faulty, you can re-issue the original configuration to locate the configuration problem.
  • D. If you suspect that there is a problem with one VC-4, you can adjust the time barrier to another VC-4.

Answer: A,B,C,D

 

NEW QUESTION 34
In 2.5G MSP ring composed of four MSTP sites, when protection switch occurs, which of the following statements about the alarm report are correct?

  • A. APS-INDI alarm is reported on the XCS board.
  • B. Report the APS-INDI alarm on the circuit board.
  • C. PS alarm is reported on the tributary board.
  • D. Report the APS-INDI alarm on the system control board.

Answer: A

 

NEW QUESTION 35
Which of the following methods does the networking and application of NG WDM include? (Multiple choice)

  • A. Point to point
  • B. Mesh
  • C. Chain type
  • D. Ring

Answer: B,C,D

 

NEW QUESTION 36
Which of the following ROADN nodes are configured correct? (Multiple choice)

  • A. WSIM9+WSD9
  • B. WSM9+RDU9
  • C. WSMD9
  • D. WSD9+RMU9

Answer: A,B,C,D

 

NEW QUESTION 37
Customer Example 1+1 protect when using different routes, the same wavelength cannot be used for the working wavelength and the guard wavelength.

  • A. FALSE
  • B. TRUE

Answer: A

 

NEW QUESTION 38
......


What is the duration, language, and format of the Huawei H31-341 Exam

  • Format of Huawei H31-341 Question: Multiple Choice Questions with Single or Multiple Answers
  • Duration of Huawei H31-341 Exam: 90 minutes
  • No. Of Questions of Huawei H31-341 Exam : 150 questions
  • Language: English

 

H31-341-ENU dumps Sure Practice with 215 Questions: https://www.freepdfdump.top/H31-341-ENU-valid-torrent.html