Nokia BL0-100 Deluxe Study Guide with Online Test Engine
BL0-100 dumps review - Professional Quiz Study Materials
Nokia BL0-100 exam is a valuable certification for anyone interested in pursuing a career in the telecommunications industry. By passing BL0-100 exam, you will demonstrate your knowledge and understanding of 5G technologies and networks, which can help you stand out to potential employers and advance your career.
Nokia BL0-100 exam is intended for individuals who are interested in pursuing a career in the field of 5G technology. BL0-100 exam is suitable for network engineers, designers, and architects who are looking to enhance their knowledge and skills in the field of 5G. Additionally, BL0-100 exam is also suitable for individuals who are interested in becoming certified 5G experts.
NEW QUESTION # 39
What is the "sweet spot" for Industry 4.0?
- A. The "sweet spot" for industry 4.0 is the intersection of operational, information and communications technologies.
- B. The "sweet spot" for industry 4.0 is a deployment strategy for delivering the required capacity and coverage for industrials.
- C. The "sweet spot" for industry 4.0 is a double-digit revenue growth.
- D. The "sweet spot" for industry 4.0 is the intersection of URLLC, eMBB and mMTC.
Answer: A
NEW QUESTION # 40
Which of the following is not a component of the 5G Flexible RAN architecture?
- A. Centralized Unit
- B. Radio Unit
- C. Optical Unit
- D. Distributed Unit
Answer: C
NEW QUESTION # 41
What does the acronym SOAR stand for?
- A. Securitization, Optimization, Access Control, and Resiliency
- B. Security Orchestration Automation and Response
- C. Security Optimization Accountability Recovery
- D. Security Orchestration Automation and Recovery
Answer: B
NEW QUESTION # 42
What is the Authentication Server Function (AUSF)?
- A. This network function supports authentication for 3GPP and non-3GPP accesses.
- B. This network function stores or retrieves subscriptions, profiles and authentication data to or from the data repositories. It offers services to the AMF, SMF, NEF and AUSF using the Service Based Interface.
- C. This network function is part of data repositories in the Common Data Layer. It stores 3GPP standardized data.
- D. This network function exposes 5G Core network functionalities available to 3rd parties, so that 3rd party capabilities and events may be securely exposed by the Network Exposure Function (NEF).
Answer: A
NEW QUESTION # 43
Which of the following are 4G limitations that justify a roll-out to 5G? (Choose three.)
- A. Beamforming is not supported
- B. Low reliability
- C. Low peak and end-user-experience throughput
- D. High latency
Answer: B,C,D
NEW QUESTION # 44
What is the best way to ensure robust slicing isolation?
- A. By implementing virtual firewall on the network slice
- B. By implementing traffic isolation on the network slice
- C. By implementing resource isolation and security isolation on the network slice
- D. By implementing user and control planes separation on the network slice
Answer: D
NEW QUESTION # 45
You are working in a logistics company. Your manager is telling you that automation is very important to create more opportunities for the company. His idea is to deliver parcels using drones. With this in mind, he asks you if a 4G network provides good connectivity for controlling the delivery drones. How would you answer him and why?
- A. Yes, 4G provides a connectivity network but, it is quite expensive. WIFI may be a preferable option.
- B. No, a 4G network is not a good choice for drone control because big operators (with whom we cannot deal) mainly deliver it.
- C. No, a 4G network cannot deliver the required connectivity. It is not able to guarantee the latency and reliability required for drone control.
- D. Yes, the drone control application can be hosted in the cloud and the 4G network can provide the speed needed to reach the application and control the drones.
Answer: D
NEW QUESTION # 46
What is Unified Data Management (UDM)?
- A. This network function supports authentication for 3GPP and non-3GPP accesses.
- B. This network function stores or retrieves subscriptions, profiles and authentication data to or from the data repositories. It offers services to the AMF, SMF, NEF and AUSF using the Service Based Interface.
- C. This network function is part of data repositories in the Common Data Layer and in opposition to the UDR, it stores non-standardized unstructured data.
- D. This network function provides registration and discovery functionality to enable other network functions/ services to discover and communicate with each other.
Answer: A
NEW QUESTION # 47
Many 5G use cases require the network to provide very high capacity in the order of 10 Gb/s. What are the 3 different methods that can be used to increase capacity in the wireless interface?
- A. more cells
high energy
more antennas - B. more cells
bigger cells
more spectrum - C. more spectrum
high spectral efficiency
higher cell density - D. use higher spectrum bands
restrict number of devices connected wirelessly
bigger cells
Answer: C
NEW QUESTION # 48
Which of the following is not a 5G Transport challenge?
- A. End-to-End TDM Synchronization
- B. High Density and Flexible X-haul
- C. Dynamic & elastic traffic patterns
- D. Explosive traffic growth
Answer: A
NEW QUESTION # 49
What 5G Core function must be in an Edge Cloud to assure very low latency in data transmission?
- A. Network Slice Selection Function
- B. User Plane Function
- C. Network Repository Function
- D. Network Exposure Function
Answer: B
NEW QUESTION # 50
SOAR can be seen as a tool for which of the following? Select the best answer.
- A. IoT attack prevention
- B. NFV overload control
- C. Security Operation Center
- D. SDN intrusion control
Answer: A
NEW QUESTION # 51
How is a slice identified in the network?
- A. By the single network slice assistance information (S-NSSAI).
- B. By the assigned customer and the slice IDs (CU-S-ID).
- C. By the QoS class ID (QCI).
- D. By the customer ID (CU-ID).
Answer: B
NEW QUESTION # 52
What functionality is applied by SDN to find an alternative path in case of failure in the Transport Network?
- A. Alternative Path Computing
- B. Path Computation Engine
- C. Path Correlation Engine
- D. Alternative Route Finding
Answer: A
NEW QUESTION # 53
Which of the following is not a component of a 5G Transport network?
- A. Optical Transport
- B. Access Backhaul
- C. IP Network
- D. TDM Network
Answer: D
NEW QUESTION # 54
What is the Unstructured Data Storage Function (UDSF)?
- A. This network function is part of data repositories in the Common Data Layer and in opposition to the UDR, it stores non-standardized - Unstructured - data.
- B. This network function is part of data repositories in the Common Data Layer. It stores 3GPP standardized data.
- C. This network function exposes 5G Core Network functionalities available to 3rd parties, so that 3rd party capabilities and events may be securely exposed by the Network Exposure Function (NEF).
- D. This network function stores or retrieves subscriptions, profiles, and authentication data to or from the data repositories. It offers services to the AMF, SMF, NEF and AUSF using the Service Based Interface.
Answer: C
NEW QUESTION # 55
Which of the following are benefits of massive MIMO? (Choose three.)
- A. Increased spectral density
- B. Increased transmission robustness with transmit diversity
- C. Reduced latency
- D. Increased throughput per user
Answer: A,B,D
NEW QUESTION # 56
What is the purpose of the secondary authentication feature?
- A. To authenticate the User Equipment with an external data network.
- B. To improve authentication between the User Equipment and the 5G Core.
- C. To improve authentication when connecting to different network slices.
- D. To authenticate the User Equipment coming from an untrusted non-3GPP access (N3IWF).
Answer: B
NEW QUESTION # 57
What will 5G bring in terms of supporting requirements of industry automation? (Choose three.)
- A. Low latency characteristics in the range of 100 to 200 ms for Remote Control Tele-operation Applications.
- B. Low latency characteristics in the range of 5 to 10 ms for High Speed Discrete Automation Applications.
- C. Low latency characteristics in the range of 50 to 100 ms for Discrete and Process Automation Applications.
- D. Low latency characteristics in the range of 0.1 to 1 ms for Video Monitoring and AR.
Answer: A,B,C
NEW QUESTION # 58
You have a trainee at your company and you are mentoring him. The trainee came across the term "Network Slicing". He asks you what is "Network Slicing" and why do we need it?
- A. Network Slicing is a technology that allows the network to serve applications with different sets of requirements in terms of latency, reliability, capacity, density, and such. Every application has a set of requirements different from others. With network slicing, we give every application what it needs from the network.
- B. Network slicing is a new technology to divide the network among users. It is needed for confidentiality purposes.
- C. Network Slicing is just like the OSI model. It is the division of the network into layers horizontally from the physical to the application. It is needed to specify which layer a service resides.
- D. Network Slicing is an end-to-end "virtual private service", extending across access, transport, core, and cloud. It is a general term used to define in which piece of the network we are.
Answer: A
NEW QUESTION # 59
What does 5G bring to Industry 4.0? (Choose two.)
- A. 5G provides the connectivity (bandwidth, latency and reliability) needed to exchange data for OT and IT functionality.
- B. 5G will generate a huge amount of data and Information Technology will provide the computing platform with analytics and AI.
- C. 5G brings nothing to Industry 4.0.
- D. 5G will generate a huge amount of data with mMTC and IT platforms are expected to suffer from this.
Answer: A,B
NEW QUESTION # 60
You and a colleague are discussing the challenges to be resolved in order to make digitization and automation a reality in all industries. He is arguing that the solution is to have faster access connectivity, but you don't agree. You are trying to convince him of the need for an end-to-end solution. The new 5G network should be built end-to-end to enable industries' quest for value. What arguments can you provide to support your position?
- A. The network consists of many layers that include access, transport, core, cloud, and all of the applications running in the cloud. Increasing throughput in access is not enough. The bit rate needs to be increased in all of the other layers as well.
- B. Increasing throughput is not enough. A faster and automated transport network, a distributed cloud where applications would run depending on their latency and reliability requirements, a core network that automatically handles any type of access, and a security framework to guarantee the security in every layer of the network are also needed.
- C. Increasing the throughput is enough. There is no need to change the network end-to-end.
- D. Increasing the access throughput might be worthwhile but applications that support a higher bit rate should also be a consideration.
Answer: B
NEW QUESTION # 61
Which of the following technologies drive 5G increased throughput capacity? (Choose three.)
- A. Higher spectral efficiency
- B. Multi-connectivity per User Equipment
- C. MU-MIMO and beamforming
- D. Network Slicing
Answer: A,C,D
NEW QUESTION # 62
......
Exam Questions Answers Braindumps BL0-100 Exam Dumps PDF Questions: https://www.freepdfdump.top/BL0-100-valid-torrent.html
