NS0-516 Exam Questions Get Updated [2021] with Correct Answers
Practice NS0-516 Questions With Certification guide Q&A from Training Expert FreePdfDump
NetApp NS0-516 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Passing Score | 75% |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Price | $150 USD |
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Duration | 90 minutes |
| Number of Questions | 60 |
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
NEW QUESTION 46
If you want to mirror data from Los Angeles to New York (approximately a 5,000-km distance), which mirroring feature should you use?
- A. Semi-synchronous
- B. Synchronous
- C. Asynchronous synchronous mode
- D. Asynchronous
Answer: D
NEW QUESTION 47
How many partitions are being used in this storage system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 48
Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?
- A. maximum transmission unit (MTU)
- B. flow control
- C. Challenge-Handshake Authentication Protocol (CHAP)
- D. Time to Live (TTL)
Answer: A
NEW QUESTION 49
If an FDE disk fails, which characteristic is required of the replacement disk?
- A. Must be of a greater capacity
- B. Must be loaded with DACstore
- C. Must be FDE capable
- D. Must be T10-P1 capable
Answer: C
NEW QUESTION 50
A company has just installed a NetApp EF600 storage array with an initial drive count of 12. A disk pool is created using all 12 disks. Benchmark testing now shows that system performance is far less than expected. Metrics show a very unbalanced use of the two PcIe busses and drives.
In this scenario, which action addresses this problem?
- A. Insert six drives into the first 12 slots and six drives into the last 12 slots.
- B. Adjust cache block sizes to 8k.
- C. Build two equally sized pools during disk pool creation.
- D. Dynamically convert the volumes from RAID 10 to RAID 5.
Answer: A
NEW QUESTION 51
You have two Linux hosts that must be connected over multiple paths to two NetApp E-Series systems. One with FC and the other with SAS.
In this scenario, which mutipathing driver should you use for each system to complete this task?
- A. Use DM-MP for SAS and LVM for FC.
- B. Use DM-MP for FC and LVM for SAS.
- C. Use LVM for FC and SAS.
- D. Use DM-MP for FC and SAS.
Answer: D
NEW QUESTION 52
Which storage manager feature scans the system for issues, reports them, and suggests procedures that will correct the issue?
- A. Event Log
- B. Storage array diagnostics
- C. Recovery guru
- D. Diagmon
- E. Performance monitor
Answer: A
NEW QUESTION 53
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)
- A. the amount of time required to copy the size of the mirror repository to the remote site
- B. the corresponding application's RPO
- C. half the corresponding application's RTO
- D. the corresponding application's RTO
- E. half the corresponding application's RPO
Answer: A
NEW QUESTION 54
You want to find detailed information about the devices that are connected to the Brocade switch.
In this scenario, which command would accomplish this goal?
- A. switchshow
- B. zoneshow
- C. nsshow
- D. portloginshow <port>
Answer: D
NEW QUESTION 55
In the storage manager client, what are host groups? (Choose the best answer.)
- A. Two or more servers that host localcache.
- B. A custom group of virtual machine hosts
- C. Volumes linked to update at the same time
- D. Two or more disk devices joined together
- E. A set of I/O hosts with access to the same set of volumes.
Answer: B
NEW QUESTION 56
A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time.
You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.
In this scenario, what is the problem?
- A. There is a cable fault preventing the on-board ports from connecting
- B. The switch ports are shut-down
- C. The on-board ports have the wrong SFPs for the desired network protocol
- D. The on-board host ports are disabled
Answer: C
NEW QUESTION 57
A company wants the most scalable host-side connection topology for E-Series systems. In this scenario, which FC topology would satisfy the requirement?
- A. direct connect
- B. fabric attach
- C. private loop
- D. arbitrated loop
Answer: B
NEW QUESTION 58
A company has a duplex E-Series system that is operating in a highly tuned environment. Load distribution between the controllers has been manually set up to achieve a specific distribution based on unique workload characteristics.
In this scenario, to maintain this load distribution over time, which E-Series feature should be disabled?
- A. Storage Load Balancer
- B. Automatic Load Balancing
- C. Automatic Node Balancer
- D. DNS Load Balancing
Answer: B
NEW QUESTION 59
A customer intends to use an E2812 system without expansion shelves. The specification for their Windows host requires that six E-Series data volumes be used.
In this scenario, how should the system be configured?
- A. one DDP for each volume
- B. one DDP with all the volumes
- C. three DDPs with the volumes divided equally
- D. two DDPs with the volumes divided equally
Answer: B
NEW QUESTION 60
Exhibit:
Which fiber cable end shown in the exhibit is supported on a NetApp E-Series system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 61
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)
- A. Map roles
- B. Configure LDAP
- C. Test SSO login
- D. Configure In-Band Management
Answer: A,B
NEW QUESTION 62
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Reinitialize the FC switch
- B. Swap out the HBA on the FC switch
- C. Move the connection to another controller port
- D. Swap out the SFP in the controller port
- E. Swap out the FC cable
Answer: A,D,E
NEW QUESTION 63
What is the first step when replacing a FRU component on a running storage system? (Choose the best answer.)
- A. Disconnect the cables from the management ports.
- B. Use SANtricity to view the target component and place the component off-line or in service mode before removing the part.
- C. Remove the part and check SANtricity for continuing errors.
- D. Power down the array before changing the part.
Answer: B
NEW QUESTION 64
Where does the explicit multipath driver reside?
- A. on the storage manager host
- B. in the controller's memory
- C. host on the storage manager client
- D. on the I/O host
Answer: D
NEW QUESTION 65
Which item can be downloaded concurrently with controller firmware? (Choose the best answer.)
- A. SANtricity software
- B. ESM firmware
- C. Drive firmware
- D. NVSRAM
Answer: D
NEW QUESTION 66
Which expansion shelf and E-Series model pairing is correct?
- A. DE5600 and E2712
- B. DE5600 and E2724
- C. DE5600 and E5612
- D. DE5600 and E5660
Answer: B
NEW QUESTION 67
In which two locations would you find the WWPNs for a Windows host? (Choose two)
- A. Windows Device Manager
- B. FC switch
- C. HBA vendor's utility
- D. host's BIOS
Answer: B,C
NEW QUESTION 68
......
Prepare Top Network Appliance NS0-516 Exam Audio Study Guide Practice Questions Edition: https://www.freepdfdump.top/NS0-516-valid-torrent.html
Free Network Appliance NS0-516 Test Practice Test Questions Exam Dumps: https://drive.google.com/open?id=19CYIdXFkU4OQj8yfyBhVkKtKEr9kYBbR
