Pass ServiceNow CIS-Discovery Actual Free Exam Q&As Updated Dump May 19, 2024
Latest CIS-Discovery Actual Free Exam Updated 115 Questions
ServiceNow CIS-Discovery certification exam evaluates candidates in three different categories: Discovery Configuration and Functionality, Discovery Implementation and Troubleshooting, and Discovery Integrations. CIS-Discovery exam focuses on testing the ability of applicants to configure and manage the Discovery application, identify the resources and their dependencies, analyze the changes and track the progress using ServiceNow Discovery. Additionally, candidates would need to have knowledge about integrating ServiceNow Discovery with other ServiceNow applications and third-party tools. These categories cover essential areas that IT professionals need to know to implement ServiceNow Discovery effectively in their day-to-day work.
ServiceNow is a popular cloud-based platform that offers a suite of IT management applications. The platform is widely used by organizations globally to streamline their IT operations and deliver better services. One of the most important modules in the ServiceNow platform is the Discovery module, which is used to map and discover IT assets and applications in an organization's network. To become a certified expert in implementing the ServiceNow Discovery module, the ServiceNow CIS-Discovery (Certified Implementation Specialist - Discovery) certification exam is designed.
NEW QUESTION # 51 
Based on the following images, which choice best describes what occurs if Discovery sets the name attribute of a discovered Windows Server CI to 'Windows1' and then Altiris discovery runs detecting 'Windows2' for the name attribute on the same CI?
- A. The name of the CI changes to 'Windows2'.
- B. The name of the CI does not populate with either discovery.
- C. The CI is not discovered because Discovery is not listed in either image.
- D. The name of the CI stays 'Windows1'.
Answer: A
Explanation:
In ServiceNow Discovery, the reconciliation process is governed by precedence rules. These rules determine which data source's information will be retained if there are conflicts when multiple sources discover the same CI. In this case, Altiris has a higher order of precedence (300) compared to ServiceNow (100), as seen in the
"Data Source Precedents" section of the image. Therefore, if Altiris discovers 'Windows2' for the name attribute on the same CI after ServiceNow sets it to 'Windows1', the name will change to 'Windows2' due to Altiris's higher precedence.
References: The explanation is inferred from understanding how reconciliation and data source precedents work in ServiceNow Discovery, though not directly quoted from specific documents. You can find more information on these topics in the following links:
* Reconciliation
* Data source precedents
NEW QUESTION # 52
Temporary variables available by default in the pattern designer.
Response:
- A. computer_system and process
- B. computer_system, hardware and process
- C. computer_server, hardware and process
Answer: A
NEW QUESTION # 53
Connect Discover option from a Discovery Schedule with its description.
Option:
1.Service
2.Serverless
3.P addresses
4. Networks
5. Configuration items
Description:
A: Create or update CIs from devices
B: Discover services for Service Mapping
C: Scan devices without credentials
D: Discover IP Networks
E: Find CIs without running host discovery
Response:
- A. 1-A, 2-C, 3-B, 4-D, 5-E
- B. 1-E, 2-B, 3-A, 4-C, 5-D
- C. 1-B, 2-E, 3-C, 4-D, 5-A
- D. 1-A, 2-B, 3-C, 4-D, 5-E
Answer: C
NEW QUESTION # 54
Which 2 of the below record types are part of the Configuration Management Database (CMDB)?
Response:
- A. Relation Type
- B. IP Address
- C. Configuration Item (Cl)
- D. Device
Answer: A,C
NEW QUESTION # 55
Which of the following choices must be installed on a MID Server to run Credential-less Discovery?
- A. Nmap
- B. Credential-less Extension
- C. Advanced IP Scanner
- D. Defender
Answer: A
Explanation:
Credential-less Discovery is a feature of ServiceNow Discovery that allows the instance to identify configuration items (CIs) without using credentials. Credential-less Discovery uses Network Mapper (Nmap), a free and open-source network scanner, to collect information about the CIs by sending packets and analyzing the responses. Nmap must be installed on the MID Server that runs Credential-less Discovery. Credential-less Discovery can be used as a fallback option when credential-based probes fail, or as a primary option for scanning certain types of devices, such as network devices, printers, or IoT devices12.
References:
* Credential-less Discovery with Nmap - Product Documentation: San Diego - Now Support Portal
* Credential-less host Discovery - ServiceNow - Now Support
NEW QUESTION # 56
One method for deleting specific CIs not discovered in 30 days is:
- A. Service Mapping
- B. Scheduled Job
- C. UI Policy
- D. Data Policy
Answer: B
Explanation:
One method for deleting specific CIs not discovered in 30 days is to use a scheduled job that runs a script to query the CMDB for CIs that have not been updated by Discovery for a certain period of time, and then delete them or mark them as retired. This method can help you keep your CMDB clean and accurate, and avoid having stale or obsolete CIs. You can configure the scheduled job to run at a specific frequency and time, and specify the criteria for selecting the CIs to delete.
References: Automated way to disable/retire CIs not updated for 45 days, ServiceNow CIS-Discovery Sample Questions
NEW QUESTION # 57
Discovery home page provides a new tile to view the results of.
Response:
- A. Asset discovery
- B. credential-less discovery
- C. Cloud discovery
- D. file-base discovery
Answer: C
NEW QUESTION # 58
When configuring the MID Server Service Settings, which of the following is not a valid MID Server name?
- A. mid serverl
- B. midserverl
- C. mymidserverl
- D. mid.serverl
Answer: A
Explanation:
In configuring the MID Server Service Settings in ServiceNow, the MID Server name must adhere to certain naming conventions. Among the options provided, "mid server1" (D) is not a valid MID Server name because it contains a space. MID Server names should not include spaces or special characters that are not typically used in naming conventions. Names like "mymidserver1," "mid.server1," and "midserver1" are more in line with the standard naming practices. References = ServiceNow MID Server documentation, specifically the sections detailing MID Server configuration and naming conventions.
NEW QUESTION # 59
Which choice best represents how to modify the functionality shown in this image?
- A. From a Probe
- B. From the MID Server
- C. From a Classifier
- D. From a Discovery Pattern
Answer: A
NEW QUESTION # 60
File-based Discovery is triggered during the .
- A. Pattern Phase
- B. Exploration Phase
- C. Identification Phase
- D. Scan Phase
- E. Classify Phase
Answer: B
NEW QUESTION # 61
When installing a MID Server on a Windows platform, which right must be associated when creating a Service Account?
- A. Log on as service
- B. MID Server User Role
- C. Local Admin
- D. Domain Admin
Answer: C
NEW QUESTION # 62
What is the correct order of the Discovery phases?
Response:
- A. Port Scan Phase, Classification Phase, Identification Phase, Exploration Phase
- B. Classification Phase, Exploration Phase, Identification Phase,Port Scan Phase
- C. Port Scan Phase, Classification Phase, Exploration Phase, Identification Phase
- D. Identification Phase, Port Scan Phase, Classification Phase, Exploration Phase
Answer: A
NEW QUESTION # 63
Which of the following must be configured to allow a MID Server to access servers using WinRM?
- A. Set the JEA Property to True
- B. Add the WinRM parameter on the target servers
- C. Add a MID Server parameter mid.windows.management protocol to use WinRM
- D. Add the MID Servers as a trusted source with DNS
Answer: C
Explanation:
For a MID Server to access servers using Windows Remote Management (WinRM), it's necessary to specify that WinRM should be used as the protocol for Windows management. This is typically done by setting the appropriate MID Server parameter, such as mid.windows.management_protocol, to WinRM. This configuration tells the MID Server to use the WinRM protocol when communicating with the target servers for executing commands and collecting data. The answer is derived from understanding how ServiceNow Discovery uses MID Servers to perform remote operations and the need to configure these MID Servers appropriately to communicate using different protocols like WinRM. It is not sufficient to just add the WinRM parameter on target servers or simply add the MID Servers as a trusted source with DNS; the MID Server itself must be configured to use WinRM. Setting a 'JEA Property' to true is not relevant to the basic configuration of a MID Server for WinRM access.
NEW QUESTION # 64
What are the Queue values on the ECC Queue sensor and probe records?
Response:
- A. Sensor records have Queue value of "input" and probe records have Queue value of "output".
- B. Sensor records have Queue value of "output" and probe records have Queue value of "input".
- C. Sensor records have Queue value of "output" and probe records have Queue value of "input".
- D. Sensor records have Queue value of "ready" and probe records have Queue value of "started".
Answer: A
NEW QUESTION # 65
How many shazzam batches are made by the Discovery Schedule for 10000 IP Addresses if the Shazzam batch size is 1000.
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 66
You should use ______ when using the SNMP Query operation.
Response:
- A. the management information base (MIB) from the manufacturer of the device you are targeting
- B. Multiple Variable Types
- C. the management Information Base (MIB) from the SNMP Browser in the step
- D. Scalar Variable Types
Answer: A
NEW QUESTION # 67
Where are the configurations for the widget metrics of the CMDB Health Dashboard captured in the system.
Response:
- A. Configuration-> Health Preferences
- B. Only a
- C. both Configuration-> Health Preferences & Configuration-> CI Class Manager
Answer: C
NEW QUESTION # 68
Which of the choices below best represent key capabilities of a ServiceNow ITOM Enterprise solution?
(Choose two.)
- A. Proactively Eliminate Service Outages
- B. Build New Apps Fast
- C. Manage Hybrid Clouds
- D. Create an Engaging User Experience
Answer: A,C
Explanation:
Based on the web search results from the search_web tool, the following choices best represent key capabilities of a ServiceNow ITOM Enterprise solution:
* Manage Hybrid Clouds: ServiceNow ITOM enables organizations to gain visibility into their IT environment, on-premises to cloud, and see the impact of their applications on business services12. It also helps to plan, track, and secure cloud implementation through best-practice governance1. Four apps comprise Cloud Accelerate to help prepare for cloud migration, streamline provisioning requests, and manage cloud resources1.
* Proactively Eliminate Service Outages: ServiceNow ITOM helps to predict issues, reduce user impact, and automate resolutions with predictive AIOps and automation13. It analyzes telemetry and log data using AI to reduce noise, expedite mapping and predict issues1. It also delivers proactive digital operations with real-time log data to solve problems quickly1.
The other choices are not specific to ServiceNow ITOM Enterprise solution, but rather general features of the ServiceNow platform. The ServiceNow platform allows users to create an engaging user experience with intuitive interfaces and workflows. It also enables users to build new apps fast with low-code development tools and pre-built components.
References: 1: ITOM - Enterprise IT Operations Management - ServiceNow 2: ServiceNow IT Operations Management (ITOM) Services | Jade 3: Modernize IT Operations Management with ServiceNow ITOM :
ServiceNow Platform
NEW QUESTION # 69
In a pattern operation, which of the following correctly calls the value of the executableDir variable from the tabular process variable?
- A. $process_executableDir
- B. process(executableDir)
- C. $process.executableDir
- D. "process_executableDir"
Answer: C
Explanation:
The $process.executableDir expression correctly calls the value of the executableDir variable from the tabular process variable. The process variable is a tabular variable that contains the output of the ps command, which lists the processes running on a CI. The executableDir variable is a column name that holds the directory path of the executable file for each process. To access the value of a column name from a tabular variable, you need to use the dot notation, such as $variable.columnName12.
References1: Pattern variables - Product Documentation: Tokyo - Now Support Portal2: Examples of EVAL scripts used in Discovery patterns - ServiceNow
NEW QUESTION # 70
Based on the following image, which of the following choices is also true about London Linux Servers?
- A. It is a Datacenter Group in London.
- B. It is a CMDB Group with Dashboard Group type.
- C. It is a CMDB Group with Health Group type.
- D. It is a CMDB Group with Default Group type.
Answer: C
NEW QUESTION # 71
......
Online Questions - Valid Practice CIS-Discovery Exam Dumps Test Questions: https://www.freepdfdump.top/CIS-Discovery-valid-torrent.html
100% Real CIS-Discovery dumps - Brilliant CIS-Discovery Exam Questions PDF: https://drive.google.com/open?id=1zpPOidGLvPmsvsVOdR_MMLIribrf5AFJ
