View All 300-435 Actual Free Exam Questions May 17, 2026 Updated
Pass Authentic Cisco 300-435 with Free Practice Tests and Exam Dumps
NEW QUESTION # 27
The automation engineer must replace device configuration using RESTCONF. How is this configured using the Python library Requests?
- A. patch()
- B. put()
- C. delete()
- D. post()
Answer: B
Explanation:
To replace device configuration using RESTCONF with the Python library Requests, one would use the put() method. The put() method in HTTP is used to update an existing resource or create it if it does not exist. In RESTCONF, which operates over HTTP, using put() will replace the entire target configuration datastore with the payload specified in the request. References: Automating Cisco Enterprise Solutions Official Cert Guide
NEW QUESTION # 28
Drag and Drop Question
Drag and drop the characteristics from the left onto the corresponding network types on the right.
Answer:
Explanation:
Explanation:
SDN decouples the control and data planes, supports abstraction, and enables centralized policy- driven control.
Traditional networks have tightly coupled planes and operate with each device making decisions independently.
NEW QUESTION # 29
Refer to the exhibit. Which device type is functioning in a degraded state?
- A. access point
- B. distribution switch
- C. access switch
- D. wireless LAN controller
Answer: C
NEW QUESTION # 30 
Refer to the exhibit. A Python script is used to configure a Cisco IOS XE router. The Loopback2 interface currently has a description of Management2 and an IP address/netmask of 10.222.34.22/32. What is the result of executing the script?
- A. The interface description remains the same.
- B. The interface is removed from the configuration.
- C. The router rejects all commands and the configuration remains the same.
- D. The interface description is removed from the configuration.
Answer: D
NEW QUESTION # 31
What are two characteristics of RPC API calls? (Choose two.)
- A. They must use SSL/TLS.
- B. Parameters can be passed to the calls.
- C. They can be used only on network devices.
- D. They call a single function or service.
- E. They use only UDP for communications.
Answer: B,C
Explanation:
Section: Network Programmability Foundation
Explanation/Reference: https://pubs.opengroup.org/onlinepubs/9629399/chap6.htm
NEW QUESTION # 32
What are two characteristics of synchronous calls to APIs? (Choose two)
- A. They add perceived latency to an application if data is not received.
- B. They block until a response is returned from the servers.
- C. They make an application less portable, so asynchronous calls are preferred.
- D. Calls are limited to specific programming languages.
- E. They do not block while waiting for the API to be processed.
Answer: A,B
Explanation:
Synchronous calls to APIs are characterized by their blocking nature, meaning the process making the request must wait until it gets a reply before it can proceed with other tasks. This can add perceived latency to an application if there is a delay in receiving data. Synchronous APIs provide immediate feedback, which is essential for operations requiring instant confirmation and interaction4567. References := ( Automating Cisco Enterprise Solutions Official Cert Guide )
NEW QUESTION # 33
Which REST endpoint is used to create a Cisco Meraki network?
- A. PUT /organizations/{organizationId}/networks
- B. PATCH /networks{networkId}
- C. POST /organizations/{organizationId}/networks
- D. POST /networks{networkId}
Answer: C
Explanation:
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Da shboard_API
NEW QUESTION # 34
Which environment must be enabled to complete the zero-touch provisioning process on a IOS XE device?
- A. TCL
- B. Guest shell
- C. ZTP Open Service container
- D. EEM
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/zero_tou
NEW QUESTION # 35
Drag and Drop Question
Drag and drop the code snippets from the bottom onto the boxes in the code to complete the retrieve_interfaces_info function that captures information about IPv4 interfaces on a device using vManage Monitoring API. Not all options are used.
Answer:
Explanation:
Explanation:
To retrieve interface data from a Cisco SD-WAN device via vManage:
The API mount point for interface data is 'device/interface'.
A GET request is used to fetch data, not a POST.
A successful response returns status code 200.
Status code 409 indicates a conflict, which the code handles explicitly.
NEW QUESTION # 36
What is a benefit of developing an application in a Python virtual environment?
- A. The application operates in multiple target systems simultaneously.
- B. The application operates across systems that have different operating systems.
- C. The application supports concurrency or multithreading.
- D. The development environment is isolated from Python projects that already exist.
Answer: D
Explanation:
Developing in a Python virtual environment isolates dependencies and libraries for a specific project, ensuring that the environment does not interfere with other Python projects on the same system.
NEW QUESTION # 37
What is a benefit of developing an application in a Python virtual environment?
- A. The application operates in multiple target systems simultaneously.
- B. The application operates across systems that have different operating systems.
- C. The application supports concurrency or multithreading.
- D. The development environment is isolated from Python projects that already exist.
Answer: D
NEW QUESTION # 38
What does the command boot ipxe forever switch 1 perform when executed on a Cisco IOS XE device?
- A. It continuously sends DNS requests for iPXE until the device boots with an image.
- B. It continuously sends DHCP requests for iPXE until the device boots with an image.
- C. It continuously sends DHCP requests for iPXE until the device restarts.
- D. It continuously sends DNS requests for iPXE until the device restarts.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-5/configuration_guide/prog/b_165_prog_3850_cg/ipxe.html
NEW QUESTION # 39
A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch. Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.
Answer:
Explanation:
NEW QUESTION # 40
On which device is the Cisco SD-WAN manage certificate management API able to install certificates?
- A. load balancer
- B. vSmart
- C. vFog router
- D. CSR 1O00v
Answer: B
Explanation:
The Cisco SD-WAN manage certificate management API is capable of installing certificates on a vSmart controller device. The vSmart controller plays a pivotal role in establishing secure connections within an SD-WAN architecture by managing security policies and traffic flow throughout the network. References:
Automating Cisco Enterprise Solutions Official Cert Guide
NEW QUESTION # 41
A developer creates a Git repository to keep the progress for the code. The repository has a feature branch and a development branch. Before the application is delivered, the two branches must be merged. Which set of commands must be run to integrate the feature branch into the development branch?
- A. git checkout development
git merge feature - B. git checkout feature
git push feature development - C. git checkout main
git merge feature - D. git checkout main
git clone feature development
Answer: A
Explanation:
To merge the feature branch into the development branch, you must first check out the development branch and then merge the feature branch into it using git merge feature.
NEW QUESTION # 42
Drag and drop the characteristic from the left onto the monitoring type described on the right
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/telemetry/70x/b-telemetry-cg-ncs5500-70x/b-telemetry-cg-ncs5500-70x_chapter_010.html
NEW QUESTION # 43
Which environment must be enabled to complete the zero-touch provisioning process on a IOS XE device?
- A. TCL
- B. Guest shell
- C. ZTP Open Service container
- D. EEM
Answer: B
NEW QUESTION # 44
What is a capability of Cisco SD-WAN vManage Certificate Management API?
- A. distributes the root certificate to client devices
- B. generates SSL certificates
- C. deletes existing installed certificates
- D. creates certificate signing requests
Answer: D
NEW QUESTION # 45
......
Difficulty in writing 300-435 Exam
300-435 ENAUTO : Automating and Programming Cisco Enterprise Solutions is among most reputed certifications that candidates can have on their resume. However, that is not cakewalk as professionals have to clear the 300-435 exam, which has been reported to be tricky and challenging exam.
To pass this exam candidates will have to work hard and do the smart study which will save their lots of study time. Following the right strategies and with time management passing this exam is an achievable goal.FreePdfDump help candidates by providing the most relevant and updated 300-435 exam dumps. Furthermore, we also provide the 300-435 practice test that will be highly beneficial in the preparation. As candidates can test their competency and acquired knowledge FreePdfDump aims to provide the best 300-435 exam dumps that is verified by the Cisco experts. If candidates face any doubt in the 300-435 practice test then our team is always there to help them. 300-435 exam dumps are the perfect way to prepare 300-435 exam with good grades in the just first attempt. So, candidates want instant success in the 300-435 exam with quality 300-435 training material then FreePdfDump is the best option for them because our management is well trained in it and we update each question of all exams on a regular basis after consulting recent updates with our Cisco certified professionals.
Cisco DNA Center
This objective covers 20% of the exam questions and validates the learners’ understanding of the specific tasks, including the following:
- Troubleshooting the automation process for Cisco DNA Center with the use of Intent APIs.
- Explaining the capabilities and features of Cisco DNA Center, such as APIs for Network assurance, Multivendor support, Intent APIs, and Events & notification;
- Implementing the API request for Cisco DNA Center for accomplishing the network management projects, including Intent APIs, site APIs, as well as APIs Command Runner;
- Comparing the software-defined and traditional networks;
New 300-435 Exam Questions Real Cisco Dumps: https://www.freepdfdump.top/300-435-valid-torrent.html
Course 2026 300-435 Test Prep Training Practice Exam Download: https://drive.google.com/open?id=16kmsy3cCKJ1qG4Xk8WXObulWrKah2xAX
