Correct Answer:

See the answer in explanation.
Explanation:
Damages are 'sum of money that the supplier pays if it fails to carry out its contractual obligation.
When creating terms for damages in the contract, it should be considered that Damages are categorized into two types (liquidated and un-liquidated). And which or if both are applicable to the contract in hand.
Liquidate Damages are fixed amount of money agreed between the parties that is payable if a contract is breached. For example, knowing that supplier not being able to install a device properly in a power transformer may destroy the device and going ahead to include a fee in the contract if the device was destroyed.
Un-liquidated damages are unfixed amount of money. It is used when the amount of money that will compensate the injured party cannot be known in advance. A court decides the amount when the damages occur. For example, knowing that supplier not being able to install a device properly in a power transformer may destroy the device, other appliances and equipment unknown, cause the buyer delay in the process and reputational damage as in customer dissatisfaction. Yet, unquantifiable as both parties are unable to fix a fee in advance on the damages and leaving it to the court to decide the damage if it may occur.
* Refer to the question column for response

Correct Answer:

See the answer in explanation.
Explanation:
A new buy is the purchase of goods and services by an organization or an individual for its first time. For example a transport organization for the very first time contracting the purchase of a Lorry out to an external supplier. In situations like this, it is advisable to start the procurement cycle from the very first stage. Which is understanding the need and developing high level specification.
Modified re-buy is the purchase of goods or services that an organization has bought before there was a need but with changes to the specification or supplier or quantity or quality. In carrying out modified re-buy, procurement professional should start from the very first stage of the procurement cycle to justify the added need and follow through. Not in all cases that buyer would have to start from understanding the need. In a situation where the changes required is a change of supplier, the organization will start from its preferred suppliers list and contract the next ranking supplier as the case may be.
* Refer to the question column for response

Correct Answer:

See the answer in explanation.
Explanation:
In the decision to not run out of supplies, organizations can anticipate a peak were by it products will be in a high demand or a period of scarcity of raw materials and may want to increase the in-ventory. However, if this forecast is not accurate, it may lead the organization to holding excess inventory. This can expose the organization to some negative factors.
Acquisition Cost: The organization will incur an acquisition cost for the excess inventory which is inclusive of the cost of placing the order and the cost of purchasing the goods.
Holding Cost: The organization will spend more money holding the stock, trying to keep it in good condition by providing the required light, temperature, skilled handlers and so on.
Working Capital not adding value: This will off shoot the holding cost. Also valuable working capital in excess stock which in the time not adding value, can affect the liquidity of the business. This is also an opportunity cost and increase solvency.

Correct Answer:

See the answer in explanation.below.
Explanation:
3.3 Analyse FIVE whole-life costs that SigmaCo should consider when sourcing globally. (25 marks) Whole-life costing means looking at the total cost of an item over its full life , rather than only the initial purchase price. CIPS defines total cost of ownership as an estimate of the end-to-end cost of providing a service or manufacturing a product, including purchase price, acquisition cost, usage cost and end-of-life cost . This is important for SigmaCo because global suppliers may offer lower unit prices, but the total cost may be much higher once all other costs are included.
1. Acquisition and logistics costs
The first whole-life cost SigmaCo should consider is the cost of getting the materials and equipment from overseas suppliers to its factory. This includes freight, shipping, insurance, port handling, customs clearance, import duties and inland transport. These costs can be significant in global sourcing and may reduce or even remove the apparent savings from lower supplier prices. In analysis, a cheap overseas unit price may not represent better value if transport and import costs are high or volatile. Since direct materials account for 65% of SigmaCo's overall spend, these additional landed costs are very important. Whole-life costing specifically includes acquisition costs, not just the purchase price.
2. Inventory and lead-time costs
A second cost is the effect of longer international lead times on inventory. If SigmaCo sources globally, it may need to hold more safety stock to protect production against shipping delays, customs problems or supply disruption. This creates costs such as warehousing, stock handling, insurance, working capital tied up in inventory and possible obsolescence. This is especially relevant in a price-sensitive toy market, where demand patterns may change quickly. Therefore, global sourcing may lower the price per unit but increase the total cost of holding stock. Whole-life cost analysis should capture these ongoing usage-related costs.
3. Quality failure and non-conformance costs
The third cost is the potential cost of poor quality. SigmaCo's brand is built partly on quality, so if globally sourced materials or equipment fail to meet specification, the business could face inspection costs, rework, scrap, production downtime, customer complaints or product returns. This is an important whole-life cost because a lower-priced supplier may create higher downstream costs if quality standards are inconsistent. In analysis, SigmaCo should not compare suppliers only on purchase price, but also on the total cost of defects and the impact on brand reputation. CIPS notes that total cost of ownership includes non-value-adding processes such as scrap and rework.
4. Supplier management, compliance and risk costs
A fourth whole-life cost is the cost of managing overseas suppliers. Global sourcing often requires more supplier evaluation, relationship management, audits, communication, travel, contract administration and risk monitoring. There may also be compliance costs linked to product safety, ethical sourcing, trade rules or due diligence requirements, depending on the source country and material. These costs are often hidden, but they are real and can be substantial when moving from local to international supply markets. In analysis, global sourcing may therefore increase procurement overhead and risk-management costs even when prices appear attractive. CIPS and wider public procurement guidance both stress that whole-life cost should include implementation and delivery risks, not simply the quoted price.
5. End-of-life and disposal costs
The fifth whole-life cost is the cost associated with the end of the item's life. For direct materials, this may include waste, disposal, recycling or handling of unusable stock. For equipment, it may include decommissioning, replacement, disposal, recycling and environmental compliance costs. These costs matter because equipment bought cheaply from overseas could be more expensive to maintain, replace or dispose of later. CIPS states that end-of-life cost is one of the core categories of total cost of ownership, and procurement guidance also says buyers should consider removal and disposal when evaluating bids.
Conclusion
In conclusion, SigmaCo should not base its decision only on the lower unit prices offered by global suppliers.
It should analyse at least five major whole-life costs: acquisition and logistics costs, inventory and lead- time costs, quality failure costs, supplier management and risk costs, and end-of-life costs . By doing this, SigmaCo will be able to judge whether global sourcing genuinely reduces total cost while still protecting quality and brand value.

Correct Answer:

See the answer in explanation.
Explanation:
It would be rare to find a supplier who does not emit any form of pollution. However, part of ethical and responsible sourcing is to make effort to reduce impact of population on the planets. Pollution can be factory emission, Noise, smell, Transportation De-velopment, waste disposal. Transportation is a major cause of pollution. The carbon dioxide emitted from vehicles contributes greatly to air contamination. Yet it is better to use sea freight rather than air because it has a smaller impact on the environment.