2021 1Y0-241 Premium Files Test pdf - Free Dumps Collection
Get ready to pass the 1Y0-241 Exam right now using our CCA-AppDS Exam Package
NEW QUESTION 33
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
- A. TCP logging is NOT enabled.
- B. User-defined audit log is NOT configured.
- C. Log level is NOT enabled.
- D. Log facility is NOT configured.
Answer: C
NEW QUESTION 34
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence:
NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. Backup content switching vServer
- B. 10.1.100.100:443
- C. http://www.site1.com/mysite1/maintenance
- D. vServer-LB-2
Answer: C
NEW QUESTION 35
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Domain sharding
- B. Image optimization
- C. Image shrink-to attributes
- D. Image lazy loading
Answer: B
Explanation:
Explanation
NEW QUESTION 36
Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:
set gslb site SiteB -triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?
- A. The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).
- B. The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.
- C. The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.
- D. The service monitor will take precedence over Metric Exchange Protocol (MEP).
Answer: B
NEW QUESTION 37
A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. WAN Insight
- B. Citrix Application Delivery Management (ADM)
- C. Security Insight
- D. HDX Insight
Answer: D
NEW QUESTION 38
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)
- A. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE - B. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - C. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - D. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 100 END -type REQ_OVERRIDE - E. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - F. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE
Answer: D,E
NEW QUESTION 39
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. Integrated caching
- B. SSL
- C. System
- D. DNS
Answer: A,D
NEW QUESTION 40
Which step can a Citrix Administrator take to use default compression policies?
- A. Disable the Citrix ADC compression feature at a global level.
- B. Select the compression algorithm (gzip/deflate/identity).
- C. Bind the default compression policies to the vServer.
- D. Enable compression on the associated bound services.
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/optimization/http-compression.html
NEW QUESTION 41
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. Integrated caching
- B. SSL
- C. System
- D. DNS
Answer: A,D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/policies-and-expressions/ introduction-to-policies-and-exp/classic-and-advanced-policy.html
NEW QUESTION 42
Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers. Due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator purchase and install to load balance the webservers?
- A. Citrix ADC CPX
- B. Citrix ADC SDX
- C. Citrix ADC MPX
- D. Citrix ADC VPX
Answer: A
Explanation:
Explanation/Reference: https://www.citrix.com.br/products/citrix-adc/cpx-express.html
NEW QUESTION 43
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Configure LACP on the SDX for management interface.
- B. Configure LACP on the SDX for the data interface.
- C. Configure a failover interface set on each Citrix ADC VPX instance.
- D. Add a second interface to each Citrix ADC VPX instance.
Answer: B
Explanation:
Explanation/Reference: https://training.citrix.com/public/Exam+Prep+Guides/241/1Y0-
241_Exam_Preparation_Guide_v01.pdf
NEW QUESTION 44
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default loadbalancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least packets
- B. Least bandwidth
- C. Least connection
- D. Least response time
Answer: C
NEW QUESTION 45
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
- A. A private key
- B. A certificate revocation list (CRL)
- C. A certificate signing request (CSR)
- D. A certificate key-pair
Answer: A
NEW QUESTION 46
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns acl6
- B. add ns simpleacl6
- C. add ns acl
- D. add ns simpleacl
Answer: C
NEW QUESTION 47
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
- A. bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
- B. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST
- C. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST
- D. bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST
Answer: A
NEW QUESTION 48
Scenario: A Citrix Administrator suspects an attack on a load-balancing vServer (IP address 192.168.100.25).
The administrator needs to restrict access to this vServer for 10 minutes.
Which Access Control List (ACL) will accomplish this?
- A. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600
- B. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600000
- C. add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600
- D. add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600000
Answer: A
NEW QUESTION 49
Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?
- A. The team member needs to troubleshoot the issue from the GUI.
- B. The team member does NOT have permission to use the CLI.
- C. The team member is NOT using the CLI correctly.
- D. The team member does NOT have shell access by design.
Answer: C
NEW QUESTION 50
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Configure LACP on the SDX for management interface.
- B. Configure LACP on the SDX for the data interface.
- C. Configure a failover interface set on each Citrix ADC VPX instance.
- D. Add a second interface to each Citrix ADC VPX instance.
Answer: B
NEW QUESTION 51
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Address (A) record
- B. Pointer Record (PTR)
- C. Canonical Name (CNAME)
- D. Name Server (NS) record
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/dns/configure-citrix-adc-adns-server.html
NEW QUESTION 52
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust "Certificate Authority" the issuer of the server's security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?
- A. Ensure that the server certificate is linked to its respective intermediate and root certificates.
- B. Ensure that users have the server certificate installed.
- C. Ensure that users have the certificate's public key.
- D. Ensure that users have the certificate's private key.
Answer: C
NEW QUESTION 53
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Address (A) record
- B. Pointer Record (PTR)
- C. Canonical Name (CNAME)
- D. Name Server (NS) record
Answer: D
NEW QUESTION 54
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
Answer: D
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX122921
NEW QUESTION 55
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. route
- B. bridge
- C. process
- D. drop
Answer: A
NEW QUESTION 56
......
Master 2021 Latest The Questions CCA-AppDS and Pass 1Y0-241 Real Exam!: https://www.freepdfdump.top/1Y0-241-valid-torrent.html
A fully updated 2021 1Y0-241 Exam Dumps exam guide from training expert FreePdfDump: https://drive.google.com/open?id=1zb0qggQWKJxqNJLDskdJwLa6cfNIE4gy
