Updated Nov 21, 2021 Verified 350-401 dumps Q&As - 100% Pass
New 2021 Latest Questions 350-401 Dumps - Use Updated Cisco Exam
The benefit in Obtaining the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
This exam will help you:
- Configure, troubleshoot, and manage enterprise wired and wireless networks
- Earn 64 CE credits toward recertification
- Implement security principles within an enterprise network
This exam is for:
- Network support technicians
- Mid-level network engineers
- Help desk technicians
- Network administrators
NEW QUESTION 109
Refer to the exhibit.
Which IPv6 OSPF network type is applied to interface Fa0/0 of R2
by default?
- A. broadcast
- B. point-to-point
- C. multipoint
- D. Ethernet
Answer: A
Explanation:
Explanation
The Broadcast network type is the default for an OSPF enabled ethernet interface (while Point-to- Point is the default OSPF network type for Serial interface with HDLC and PPP encapsulation).
NEW QUESTION 110
An engineer must create an EEM script to enable OSPF debugging in the event the OSPF neighborship goes down. Which script must the engineer apply?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 111
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.
Answer:
Explanation:
NEW QUESTION 112
What is one benefit of implementing a VSS architecture?
- A. It provides multiple points of management for redundancy and improved support
- B. It uses a single database to manage configuration for multiple switches
- C. It provides a single point of management for improved efficiency.
- D. It uses GLBP to balance traffic between gateways.
Answer: C
Explanation:
Support Virtual Switching System (VSS) to provide resiliency, and increased operational efficiency with a single point of management; VSS increases operational efficiency by simplifying the network, reducing switch management overhead by at least 50 percent. - Single configuration file and node to manage. Removes the need to configure redundant switches twice with identical policies.
NEW QUESTION 113 
Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 114
An engineer is troubleshooting the Ap join process using DNS. Which FQDN must be resolvable on the network for the access points to successfully register to the WLC?
- A. primary-wlc.domain.com
- B. ap-manager.domain.com
- C. wlcbostname.domain.com
- D. cisco-capwap-controller.domain.com
Answer: D
NEW QUESTION 115
A customer has 20 stores located throughout a city. Each store has a single Cisco AP managed by a central WLC. The customer wants to gather analytics for users in each store. Which technique supports these requirements?
- A. presence
- B. hyperlocation
- C. trilateration
- D. angle of arrival
Answer: A
Explanation:
We only have one AP in each store so we can only user "Presence", which is the most basic form of location tracking.
NEW QUESTION 116
Refer to the exhibit.
Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of 192.168.1.200?
- A. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 global
ip route 192.168.1.0 255.255.255.0 Vlan10
ip route 172.16.1.0 255.255.255.0 Vlan20 - B. ip route vrf Customer1 172.16.1.1 255.255.255.255 172.16.1.1 global
ip route vrf Customer 192.168.1.200 255.255.255.0 192.168.1.1 global
ip route 192.168.1.0 255.255.255.0 Vlan10
ip route 172.16.1.0 255.255.255.0 Vlan20 - C. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer1
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer2 - D. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer2
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer1
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.html
Static routes directly between VRFs are not supported so we cannot configure a direct static route between two VRFs.
The command "ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global" means in VRF Customer1, in order to reach destination 172.16.1.0/24 then we uses the next hop IP address 172.16.1.1 in the global routing table. And the command "ip route 192.168.1.0 255.255.255.0 Vlan10" tells the router "to reach 192.168.1.0/24, send to Vlan 10".
NEW QUESTION 117
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
- A. Deny tcp any any ne 80
Permit tcp any any range 22 443 - B. Permit tcp any any range 22 443
Deny tcp any any eq 80 - C. Deny tcp any any eq 80
Permit tcp any any gt 21 it 444 - D. Permit tcp any any ne 80
Answer: C
NEW QUESTION 118
Which two LISP infrastructure elements are needed to support LISP to non-LISP internetworking? (Choose two)
- A. MR
- B. PITR
- C. MS
- D. ALT
- E. PETR
Answer: A,E
NEW QUESTION 119
A wireless consultant is designing a high-density wireless network for a lecture hall for 1000 students Which antenna type is recommended for this environment?
- A. sector antenna
- B. parabolic dish
- C. omnidirectional antenna
- D. dipole antenna
Answer: C
NEW QUESTION 120
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. R4(config-router)bgp default local-preference 200
- B. R3(config-router)neighbor 10.1.1.1 weight 200
- C. R4(config-router)nighbor 10.2.2.2 weight 200
- D. R3(config-router)bgp default local-preference 200
Answer: A
Explanation:
Explanation
Local preference is an indication to the AS about which path has preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100.
Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute that routers exchange in the same AS. The local preference is set with the "bgp default local-preference value" command.
In this case, both R3 & R4 have exit links but R4 has higher local-preference so R4 will be chosen as the preferred exit point from AS 200.
NEW QUESTION 121
Refer to the exhibit.
Which type of antenna do the radiation patterns present?
- A. Yagi
- B. Dipole
- C. Omnidirectional
- D. Patch
Answer: D
NEW QUESTION 122
Which line must be added in the Python function to return the JSON object {"cat_9k": "FXS193202SE")?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 123
Refer to the exhibit.
Which command set must be added to the configuration to analyze 50 packets out of every 100?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 124
Which LISP device is responsible for publishing EID-to-RLOC mappings for a site?
- A. ETR
- B. MS
- C. MR
- D. ITR
Answer: A
Explanation:
An Egress Tunnel Router (ETR) connects a site to the LISP-capable part of a core network (such as the Internet), publishes EID-to-RLOC mappings for the site, responds to Map-Request messages, and decapsulates and delivers LISP-encapsulated user data to end systems at the site.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl- xe-3s-book/irl-overview.html
NEW QUESTION 125
Which deployment option of Cisco NGFW provides scalability?
- A. tap
- B. high availability
- C. inline tap
- D. clustering
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/asa-cluster-solution.html Clustering lets you group multiple Firepower Threat Defense (FTD) units together as a single logical device. Clustering is only supported for the FTD device on the Firepower 9300 and the Firepower 4100 series. A cluster provides all the convenience of a single device (management, integration into a network) while achieving the increased throughput and redundancy of multiple devices.
NEW QUESTION 126
What is the purpose of an RP in PIM?
- A. ensure the shortest path from the multicast source to the receiver.
- B. secure the communication channel between the multicast sender and receiver.
- C. send join messages toward a multicast source SPT
- D. receive IGMP joins from multicast receivers.
Answer: B
Explanation:
NEW QUESTION 127 
Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?
- A. The NETCONF running datastore is currently locked.
- B. The device received a valid NETCONF request and serviced it without error.
- C. A NETCONF request was made for a data model that does not exist.
- D. A NETCONF message with valid content based on the YANG data models was made, but the request failed.
Answer: C
Explanation:
NEW QUESTION 128
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
Explanation
Traffic Policing: Drops excessive Traffic, causes TCP retransmissions, introduce no delay/jitter Shaping: buffers, excessive traffic, introduce delay and jitter, typically delays, rather than drops traffic
NEW QUESTION 129 
Refer to the exhibit. An engineer must ensure that all traffic entering AS 200 form AS 100 chooses link 2 an enter all BGP neighbor relationship have been formed and that attributes have not been changed on any of the router.
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 130
What are two differences between the RIB and the FIB? (Choose two.)
- A. The FIB is derived from the data plane, and the RIB is derived from the FIB.
- B. The RIB is derived from the control plane, and the FIB is derived from the RIB.
- C. FIB is a database of routing prefixes, and the RIB is the information used to choose the egress interface for each packet.
- D. The RIB is a database of routing prefixes, and the FIB is the Information used to choose the egress interface for each packet.
- E. The FIB is derived from the control plane, and the RIB is derived from the FIB.
Answer: B,D
Explanation:
Reference:
The Forwarding Information Base (FIB) contains destination reachability information as well as next hop information. This information is then used by the router to make forwarding decisions. The FIB allows for very efficient and easy lookups
NEW QUESTION 131
An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the must be the active HSRP router. The peer router has been configured using the default priority value. Which command set is required?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 132
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. R4(config-router)bgp default local-preference 200
- B. R3(config-router)neighbor 10.1.1.1 weight 200
- C. R4(config-router)nighbor 10.2.2.2 weight 200
- D. R3(config-router)bgp default local-preference 200
Answer: A
Explanation:
Explanation
Local preference is an indication to the AS about which path has preference to exit the AS in order to reach a certain network. A path with a higher local preference is preferred. The default value for local preference is 100.
Unlike the weight attribute, which is only relevant to the local router, local preference is an attribute that routers exchange in the same AS. The local preference is set with the "bgp default local-preference value" command.
In this case, both R3 & R4 have exit links but R4 has higher local-preference so R4 will be chosen as the preferred exit point from AS 200.
NEW QUESTION 133
......
Latest 350-401 Exam Dumps Cisco Exam from Training: https://www.freepdfdump.top/350-401-valid-torrent.html
Pass Cisco 350-401 PDF Dumps Recently Updated 305 Questions: https://drive.google.com/open?id=1i8SUGICebjZHO0Aq-JSxVIqMUxI0WU1z
